Synthesis of well-defined polymers with protected silanol groups by atom transfer radical polymerization and their use for the fabrication of polymeric nanoparticles

Copper-mediated atom transfer radical polymerization (ATRP) of a protected silanol group-holding methacrylate, methacryloxypropyltrimethoxysilane (MOPS), was investigated. In a dry condition using carefully distilled solvent and monomer, the polymerization proceeded in a living fashion providing a low-polydispersity polymer with a predicted molecular weight. The ATRP in conjunction with the sequential monomer addition of methyl methacrylate (MMA) and MOPS afforded a block copolymer of the type PMMA-b-poly(MMA-r-MOPS). The heat treatment of a solution of the block copolymer in the presence of a catalytic amount of ammonia gave a polymeric core-shell nanoparticle with a shell of PMMA moieties and a core of the poly(MMA-r-MOPS) blocks cross-linked via the condensation of the trimethoxysilane groups of the MOPS moieties.     

Artificial model for cystathionine β-synthase: efficient β-replacement reaction with thiols employing a novel pyridoxal model compound having an imidazole function

As a second-generation pyridoxal model compound for cystathionine β-synthase, we designed a novel model compound having an ionophore function and an imidazole function, application of which to the β-replacement reaction with various thiols smoothly took place to give S-substituted cysteines. Peptides having a serine-O-carbonate residue at the N-terminal position were also converted to the corresponding peptides having an S-substituted cysteine residue under the catalytic conditions of the novel pyridoxal model compound.     

Grafting of a bicycloorthoester onto polymers bearing sulfonium salt structures

Graft copolymerization of a bicycloorthoester (BOE) with polymer-supported sulfonium salts was studied. Several polymer-supported sulfonium salts were prepared by the homopolymerizations of p-vinylbenzyl tetramethylenesulfonium hexafluoroantimonate ( 2 ) and 4-(p-vinylphenyl)butyl tetramethylenesulfonium hexafluoroantimonate ( 3 ), and by the copolymerizations of 2 with some vinyl monomers (n-butyl vinyl ether, styrene, acrylonitrile, and p-styrenesulfonic acid potassium salt). These sulfonium salts could initiate the polymerization of BOE to give grafted polymers. Temperature dependences of the catalytic activity of them were not so dramatic as that of benzyl tetramethylenesulfonium hexafluoroantimonate ( 1 ), but the activities of them were higher than that of 1 at temperatures lower than 80°C. The conversion of BOE in the polymerizations with these polymer initiators was ca. 30–70% at 120°C for 7 h. An effect of the comonomer structure on the catalytic activity was observed and styrene was the best comonomer for 2 in terms of the reactivity of the copolymer. The spacer-modified sulfonium salt (homopolymer of 3 ) was slightly lower than polymer-supported benzyl type sulfonium salt (homopolymer of 2 ) in the catalytic activity.     

Chemo-enzymatic Synthesis of Novel Oligo-N-acetyllactosamine Derivatives having a β(1-4)–β(1-6) Repeating Unit by Using Transition State Analogue Substrate

Chitinase-catalyzed hydrolytic and transglycosylating behavior of 1,2-oxazoline derivative of N-acetyllactosamine (LacNAc-oxa) 1 has been investigated. An extremely rapid hydrolysis (ring-opening of the oxazoline moiety) could be observed, suggesting that 1 behaves as a transition state analogue substrate for chitinase A1 (Bacillus circulans WL-12). This disaccharide monomer 1 was found to polymerize under basic conditions, giving rise to novel oligosaccharides having a β(1-4)–β(1-6) repeating unit in the main chain. The degree of polymerization of the resulting oligosaccharides was up to 5. This is the first example of enzymatic glycosylation reaction forming a β(1-6) bond catalyzed by chitinase.     

Design and synthesis of highly sensitive and selective fluorescein-derived magnesium fluorescent probes and application to intracellular 3D Mg2+ imaging

The role of intracellular magnesium ions is of high interest in the fields of pharmacology and cellular biology. To accomplish the dynamic and three-dimensional imaging of intracellular Mg2+, there is a strong desire for the development of optimized Mg2+ fluorescent probes. In this paper we describe the design, synthesis, and cellular application of the three novel Mg2+ fluorescent probes KMG-101, -103, and -104. The compounds of this series feature a charged beta-diketone as a binding site specific for Mg2+ and a fluorescein residue as the fluorophore that can be excited with an Ar+ laser such as is widely used in confocal scanning microscopy. This molecular design leads to an intensive off-on-type fluorescent response toward Mg2+ ions. The two fluorescent probes KMG-103 and -104 showed suitable dissociation constants (Kd,Mg2+ = 2 mM) and nearly a 10-fold fluorescence enhancement over the intracellular magnesium ion concentration range (0.1-6 mM), allowing high-contrast, sensitive, and selective Mg2+ measurements. For intracellular applications, the membrane-permeable probe KMG-104AM was synthesized and successfully incorporated into PC12 cells. Upon application of the mitochondria uncoupler FCCP to the probe-incorporated cells, the resulting increase in the free magnesium ion concentration could be followed over time. By using a confocal microscope, the intracellular 3D magnesium ion concentration distributions were satisfactorily observed.     

Fluorimetric assay for measuring Dns-His-Lys-Arg-His-Lys cleaving enzyme using high-performance liquid chromatography

A rapid and sensitive assay for the determination of Dns-His-Lys-Arg-His-Lys cleaving enzyme activity is reported. This assay is based on fluorimetric detection of a dansylated dipeptide, 5-dimethylaminonaphthalene-1-sulfonyl-His-Lys, enzymatically formed from the substrate 5-dimethylaminonaphthalene-1-sulfonyl-His-Lys-Arg-His-d-Lys, after separation by high-performance liquid chromatography (HPLC) using a C-18 reversed-phase column by isocratic elution. This assay is sensitive enough to measure 5-dimethylaminonaphthalene-1-sulfonyl-His-Lys at concentrations as low as 7 pmol, and yields highly reproducible results and requires less than 9.0 min per sample for separation and quantitation. The optimum pH for Dns-His-Lys-Arg-His-Lys cleaving enzyme activity was 7.5-8.0. The Michaelis constant (K_m) and the maximum velocity (V_max) values were 33.3 μM and 47.07 pmol/(μg h), respectively with the use of enzyme extract obtained from bovine pituitary. By using this assay, axonal transport of this enzyme activity was observed 48 h after double ligations of rat sciatic nerves. The high sensitivity and selectivity of this assay would be useful for clarification of the physiological role of this enzyme.     

Synthesis and polymerization of 4-o-vinylbenzyl-2,2,6,6-tetramethylpiperidine

Some hindered amine polymers containing 2,2,6,6-tetramethylpiperidine structure were synthesized. A new monomer, 4-O-vinylbenzyl-2,2,6,6-tetramethylpiperidine, was homopolymerized and copolymerized with some vinyl monomers in the presence of AIBN as an initiator. The obtained amine polymers were oxidized with hydrogen peroxide to obtain the polymers having nitroxyl radical moiety.     

Facile construction and divergent transformation of polycyclic isoxazoles: direct access to polyketide architectures

[reaction: see text] Base-promoted cyclocondensation of C-chloro oximes with cyclic 1,3-diketones affords functionalized isoxazoles in good yield and under convenient reaction conditions. This process enables the synthesis of highly substituted products with notable functional group tolerance. The products obtained are directly converted to a variety of polyketide-derived polycyclic structures including xanthenes, anthracenes, and benzophenones.     

Development of rectangular column structured titanium oxide photocatalysts anchored on silica sheets by a wet process

Commercially available powdered photocatalysts such as P-25 are known to show high photocatalytic performance. However, in practical use, their anchoring onto a substrate without any binders is still very difficult. The purpose of this study is to design and develop high-performance photocatalysts that can be anchored onto a substrate, and to this end we have prepared a titanium oxide photocatalyst using a wet process. The results of this study led to the successful development of rectangular column structured titanium oxide crystals which could be anchored onto silica sheets. The rectangular columnar crystal was 100- 500 nm wide and 1000- 5000 nm long. Moreover, investigations on the complete oxidation reaction of acetaldehyde into CO₂ and H₂O showed a high performance equivalent to that of the most efficient marketed powdered photocatalysts.     

SPECIFIC PHOTOCOUPLING OF 5-BROMOURIDINE TO TRYPTOPHAN IN AQUEOUS FROZEN SOLUTION§

Abstract —5-Bromouridine (BrUd) photochemically reacted with l -tryptophan (trp) only in aqueous frozen solution giving rise to 2-[1,2,3,4-tetrahydro-1-(β-d -ribofuranosyl)-2,4-dioxo-5-pyrimidinyl]-l -tryptophan ( 1a ). Under similar conditions irradiation of 5-bromouracil (BrU) and trp gave the corresponding coupled product 2. Addition of acetone, potassium carbonate or sodium chloride to the frozen system completely inhibited the photocoupling reaction. These photocoupling reactions are suggested to proceed via mixed aggregate formation between trp and BrUd (or BrU) in frozen aqueous solution. Stacking interactions in these aggregates are characterized by an efficient quenching of trp fluorescence by BrUd. Under the same conditions other amino acids such as phenylalanine, tyrosine, histidine and lysine did not react with BrUd, indicating that the photocoupling of BrUd (or BrU) is specific for trp.